-
"The use of multiarm star-like polymers in the preparation of epoxy thermosets by UV-cationic photopolymerization. Effect of the arms of the star in the curing process and in the final properties and morphology"
Foix, D., Morell, M., Serra, A., Sangermano, M.
Polym. Eng. Sci. 54, 17-23, 2014.
-
"From Curing kinetics to network structure: A novel approach to the modeling of the network build-up of epoxy-anhydride thermosets"
Fernández-Francos, X., Ramis, X., Serra, A.
J. Polym. Sci. Part A: Polym. Chem. 52, 61-75, 2014.
-
"Effect of hydroxyl ended and end-capped multiarm star polymers on the curing process and mechanical characteristics of epoxy/anhydride thermosets"
Acebo, C., Picardi, A., Fernández-Francos, X., De la Flor, S., Ramis, X., Serra, À.
Prog. Org. Coat. 77, 1288-1298, 2014.
-
"Photocuring of Cycloaliphatic Epoxy Formulations using Polyesters with Mutiarm Star Topology as Additives"
Flores, M., Fernández-Francos, X., Ramis, X., Sangermano, M., Ferrando, F., Serra, À.
J. Appl. Polym. Sci.131, 1-9, 2014.
-
"A versatile thiol-ene/sol-gel two-stage curing process based on a hyperbranched polyester with different degrees of 10-undecenoyl modification"
Flores, M., Foix, D., Serra, À., Fernández-Francos, X., Ramis, X., Sangermano, M.
Macromol. Mat. Eng. 299, 499-503, 2014.
-
"New epoxy-anhydride thermosets modified with multiarm stars with hyperbranched polyester cores and poly(e-caprolactone) arms"
Tomuta, A.M., Fernández-Francos, X., Ferrando, F., Serra, A., Ramis, X.
Polym. Plast. Technol. Eng. 53, 645-654, 2014.
-
"Comparative Analysis of Stochastic Network Build-up Methods for the Curing of Epoxy-Anhydride Thermosets"
Fernandez-Francos, X., Serra, A., Ramis, X.
Eur. Polym. J. 53, 22-36, 2014.
-
"Cure kinetics modelling and thermomechanical properties of cycloaliphatic epoxy-anhydride thermosets modified with hyperstar polymers"
Belmonte, A., Däbritz, F., Ramis, X., Serra, À., Voit, B., Fernández-Francos, X.
J. Polym. Sci. Part B Polym. Phys. 52, 1227-1242, 2014.
-
"Influence of holding time on shape recovery in a polyurethane shape-memory polymer" Santiago, D., Ferrando, F., De la Flor, S.
J. Mater. Eng. Perf. 23, 2567-2573, 2014.
-
"Effect of Different Shape-Memory Processing Methods on the Thermomechanical Cyclic Properties of a Shape-Memory Polyurethane"
Santiago, D., Ferrando, F., De la Flor, S.
J. Mater. Eng. Perf. 23, 2561-2566, 2014.
-
"New epoxy thermosets modified with amphiphilic multiarm star polymers as toughness enhancer"
Lagunas, C., Fernández-Francos, X., Ferrando, F., Flores, M., Serra, À., Morancho, J.M., Salla, J.M., Ramis, X.
React. Funct. Polym. 83, 132-143, 2014.
-
"Actuator response of improved two-way memory TiNi wires evaluated by weight fraction diagrams"
Urbina, C., de la Flor, S., Gispert-Guirado, F., Ferrando, F.
J. Mater. Eng. Perf. 23, 1680-1694, 2014.
-
"NiTiCu Shape Memory Alloy Characterization through Microhardness Tests"
Fabregat-Sanjuan, A., Ferrando, F., De la Flor, S.
J. Mater. Eng. Perf. 23, 2498-2504, 2014.
-
"Novel epoxy-silica hybrid coatings by using ethoxysilyl-modified hyperbranched poly(ethyleneimine) with improved scratch resistance"
Acebo, C., Fernández-Francos, X., Messori, M., Ramis, X., Serra, À.
Polymer 55, 5028-5035, 2014.
-
"New catalyst for diglycidylether of bisphenol A curing based on thiol-epoxy click reaction"
Guzmán, D., Ramis, X., Fernández-Francos, X., Serra, A.
Eur. Polym. J. 59, 377-386, 2014.
-
"A new epoxy-based layered silicate nanocomposite using a hyperbranched polymer: Study of the curing reaction and nanostructure development"
Cortés, P., Fraga, I., Calventus, Y., Román, F., Hutchinson, J.M., Ferrando, F.
Materials 7: 1830-1849, 2014.
-
"Comparison of the nanostructure and mechanical performance of highly exfoliated epoxy-clay nanocomposites prepared by three different protocols"
Shiravand, F., Hutchinson, J.M., Calventus, Y., Ferrando, F.
Materials, 7: 4196-4223, 2014.
-
"Comparative results between three protocols for achieving highly exfoliated epoxy-clay nanocomposites"
Hutchinson, J.M., Shiravand, F., Calventus, Y., Ferrando, F.
Polimery/Polymers, 59: 636-642, 2014.
